March 2026 update

The chia farm is still running.

Chia have released a 2.7.0 version that is needed for the upcoming soft-fork to address the blockchain security threats from AI. The soft-fork will activate at block 8,655,000, around the 29th of April.

Apart from applying a point release to bring all the harvesters up to date I also had to upgrade the chia client on each one due to the 2.7.0 release.

As of writing this the farm consists of 8 harvesters and one full-node. It has 4253 plots totalling 420TiB.

I am still trying to fill one of the harvesters after the TR-004 decided it didn't understand the disk configuration. Refer to my Sept 2025 "The farm took a hit" post for the details.

 

Comments

Post a Comment

Popular posts from this blog

March 2025 update

I currently have 2597 plots spread between 4 harvesters. Due to heat I have had the Chia farm off for multiple days which doesn't help with winning blocks or for filling up the 2nd TR-004. Current storage consists of: Main storage is a 10 x 20TB machine running ZFS file system, raidz2 (1460 plots) Secondary storage is 7 x 8TB machine running ZFS file system, raidz1 (397 plots) Pi5 (8GB) + TR004 with 4 x 16TB drives running bftrs file system, raid0 (560 plots) Pi5 (8GB) + TR004 with 4 x 16TB drives running btrfs file system, raid0 (slowly filling - 190 plots) I have a I5-11000 machine as the full node.   The good news is the  Pi5 + TR004 seems quite scalable, that is its fairly easy to add another one and once filled can switch it over to being a harvester. I'm seeing average latency on the Pi5 harvester of 400ms and max of 1.5 seconds, so it seems able to handle the random reads. While one could use a rack mount system with tons of drives I don't think the returns are enoug...
Read more

April 2024 update

I bought 10 x 22TB Seagate HDD. Last week I bit the bullet and removed all the 16TB HDD from the primary storage server and put the 22TB drives in. I am now plotting away trying to fill it up. The Bladebit CPU plotter seems to lock up my full-node so I have to check on it once a day. The used 16TB drives are destined to go into a couple of QNAP TR004 units running in JBOD mode plugged into a Raspberry Pi5 running as a harvester. The TR004 can hold 4 drives. If this setup works out I will look at replacing the two Pi4 + external HDD's with Pi5 + TR004 units. I might have 3 of these as it seems a fairly inexpensive way of adding another harvester with 64TB of disk space. Speaking of the 16TB drives, I returned a 2nd WD 16TB HDD and picked up a replacement under warranty for the previous drive that I returned. It had been sitting at the computer shop for almost 3 months before I drove there to pickup the replacement. Thats 2 out of 14 WD drives that have failed so far. The lack of rel...
Read more

July 2025 update

  I currently have 4350 plots taking 430.5TiB spread between 8 harvesters. Current storage consists of: Main storage is a PC with 10 x 20TB drives running ZFS in raidz2 (1460 plots). Secondary storage is a PC with 7 x 8TB drives running ZFS in raidz1 (397 plots). Pi4 (4GB) plus 2 x 16TB USB drives running btrfs in single mode (280 plots). Pi4 (4GB) plus 2 x 16TB USB drives running btrfs in single mode (275 plots). Pi5 (8GB) plus TR004 with 4 x 16TB drives running bftrs in raid0 mode (560 plots). Pi5 (8GB) plus TR004 with 4 x 16TB drives running btrfs in raid0 mode (560 plots). Pi5 (8GB) plus TR004 with 4 x 16TB drives running btrfs in raid0 mode (560 plots). Pi5 (8GB) plus TR004 with 4 x 16TB drives running btrfs in raid0 mode (268 plots, filling up).  Full node is an Intel I5-11000 PC with a U.2 enterprise SSD for work space (currently on its 3rd) plus a couple of M.2 SSD (boot drive, spooling drive). It has 128GB of RAM and a 10GbE NIC. Even the enterprise SSD's wear out. A...
Read more